Abstract

The production of VFA using as substrate the wastewater produced in a cooked mussel processing factory, containing large COD (13.7 ± 3.2 g COD/L), salt concentrations (21.8 ± 2.8 g NaCl/L) and characterized by low pH (4.6 ± 0.6) was evaluated. This wastewater was fed to a 5-L completely stirred tank reactor operated in continuous mode. The conversion efficiency of its COD content into volatile fatty acids (VFA) was evaluated. The maximum acidification of 43% (total VFA on soluble COD basis) was obtained when an organic loading rate of 2.5 ± 0.4 g COD/(L·d) was applied to the reactor and corresponded to a VFA volumetric productivity of 0.72 ± 0.07 g CODVFA/(L·d). Under steady-state conditions, the obtained mixture of VFA was composed by 80:18:2 as acetic:propionic:butyric acids (percentage of VFA on soluble COD basis). Carbohydrates were degraded up to 96% while protein fermentation did not take place, probably due to the low pH value, limiting the maximum acidification of the wastewater. Batch experiments showed that the increase of the pH from 4.2 to 4.9 by the addition of NaHCO3 resulted in the improvement of the acidification and changed the VFA mixture composition. Thus, this study demonstrates the opportunity of using complex substrates, as cooked mussel processing wastewater, to produce rich-VFA streams under unfavourable operational conditions, such as high salinity and low pH.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.