VOC Elimination in a Compost Biofilter Using a Previously Acclimated Bacterial Inoculum

Abstract

ABSTRACT A comparison of biodégradation efficiencies was done for volatile benzene, toluene, ethylbenzene, m-xylene, p-xy-lene, and o-xylene elimination in a compost biofilter. The column was first exposed to a synthetic mixture and then a free phase product mixture containing these compounds at increasing pollutant loads. The optimal moisture content of the system was determined, and this was used in the biodegradation experiments. An acclimated culture was used as an inoculum for the biofilter, the matrix of which consisted of composted forestry products, composted sewage sludge, lime, and perlite. Inlet and outlet concentrations were measured, and pollutant loads, elimination capacities, and removal efficiencies were determined for each of the compounds. Optimal moisture content for this system was found to be 40%, and the short lag times (one to five days) in acclimating to the compounds was ascribed to the presence of the well-acclimated inoculum. The compounds in the synthetic mixture had higher removal efficiencies (80-99%) even at the higher pollutant loads experienced, with the exception of o-xylene. Dynamic removal efficiencies and acclimation periods were seen in the free phase product mixture, with a removal efficiency range from 70 to 95%. This was attributed to the presence of chlorinated aliphatics in the free phase product.