Abstract
The fictitious notch rounding concept is applied for the first time to V-notches with root hole subjected to in-plane mixed mode loading. Outof- bisector crack propagation is taken into account. The fictitious notch radius is determined as a function of the real notch radius, the microstructural support length and the notch opening angle. Due to the complexity of the problem, a method based on the simple normal stress failure criterion has been used. It is combined with the maximum tangential stress criterion to determine the crack propagation angle. An analytical method based on Neuber's procedure has been developed. The method provides the values of the microstructural support factor as a function of the mode ratio and the notch opening angle. The support factor is considered to be independent of the microstructural support length. Finally, for comparison, the support factor is determined on a purely numerical basis by iterative analysis of FE models.
Highlights
A ll previous publications on the fictitious notch rounding (FNR) concept deal with the pure loading modes 1, 2 and 3
The aim of the present paper is to provide a theoretically founded basis for the application of the FNR approach to in-plane mixed mode loading
Based on FNR concept used in combination with the normal stress criterion for the averaged notch stress and the maximum tangential stress criterion for the crack propagation angle, the support factor has been analytically and numerically determined for V-notches with root hole subjected to in-plane mixed mode loading
Summary
A ll previous publications on the fictitious notch rounding (FNR) concept deal with the pure loading modes 1, 2 and 3. The difficulty of considering mixed mode loading conditions is due to the fact that the most critical direction, in which cracks might provisionally initiate and propagate, varies as a function of the mode ratio. This direction varies from the notch bisector line in the case of pure mode 1 loading, to a direction substantially out of the notch bisector line in the case of pure mode 2 loading. In the high-cycle fatigue regime, notch stress averaging should take a path which coincides with the point and direction of fatigue crack initiation and propagation. The basic idea of the FNR concept is to determine the fatigue-effective averaged notch stress directly
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
