Abstract
In response to the problems of low accuracy and poor noise immunity of the traditional fault diagnosis method for rolling bearing fault diagnosis due to the complex and variable operating conditions of rolling bearings and the large noise interference during bearing signal acquisition, a rolling bearing fault diagnosis model based on VMD–RP–CSRN is proposed. Firstly, the initial feature extraction of the bearing signal is carried out by variational modal decomposition (VMD), which is then converted into a two-dimensional image with fault features by recurrent plot (RP) coding, and then the feature images are input to a channel split residual network (CSRN) for feature extraction and fault classification. In order to verify the accuracy and noise immunity of the proposed method for the diagnosis of bearing faults under complex working conditions, experiments on the selection of parameters in the CSRN model were conducted on the bearing dataset of Jiangnan University, and experiments on the diagnosis of bearing faults under complex working conditions and noise immunity of CSRN were carried out and compared with other commonly used methods. The proposed bearing fault diagnosis method based on VMD–RP–CSRN combines VMD and RP to retain the fault features in the original signal to the maximum extent and stress the hidden features in the signal. The proposed channel split operation realizes the extraction of hidden features by selecting the main operating channel of the three-channel feature image, and makes more fault features participate in the feature extraction of the diagnosis model. The experimental results demonstrate that the proposed method is at least 1.2% better than the comparison method, and has better noise immunity. In addition, experiments on the fault diagnosis capability of the model with different data set sizes and the diagnosis of variable speed bearing data by the model show that the proposed method has better generalization performance and diagnosis capability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.