Abstract

Context.Until recently, the 3D shape, and therefore density (when combining the volume estimate with available mass estimates), and surface topography of the vast majority of the largest (D ≥ 100 km) main-belt asteroids have remained poorly constrained. The improved capabilities of the SPHERE/ZIMPOL instrument have opened new doors into ground-based asteroid exploration.Aims.To constrain the formation and evolution of a representative sample of large asteroids, we conducted a high-angular-resolution imaging survey of 42 large main-belt asteroids with VLT/SPHERE/ZIMPOL. Our asteroid sample comprises 39 bodies withD ≥ 100 km and in particular mostD ≥ 200 km main-belt asteroids (20/23). Furthermore, it nicely reflects the compositional diversity present in the main belt as the sampled bodies belong to the following taxonomic classes: A, B, C, Ch/Cgh, E/M/X, K, P/T, S, and V.Methods.The SPHERE/ZIMPOL images were first used to reconstruct the 3D shape of all targets with both the ADAM and MPCD reconstruction methods. We subsequently performed a detailed shape analysis and constrained the density of each target using available mass estimates including our own mass estimates in the case of multiple systems.Results.The analysis of the reconstructed shapes allowed us to identify two families of objects as a function of their diameters, namely “spherical” and “elongated” bodies. A difference in rotation period appears to be the main origin of this bimodality. In addition, all but one object (216 Kleopatra) are located along the Maclaurin sequence with large volatile-rich bodies being the closest to the latter. Our results further reveal that the primaries of most multiple systems possess a rotation period of shorter than 6 h and an elongated shape (c∕a≤ 0.65). Densities in our sample range from ~1.3 g cm−3(87 Sylvia) to ~4.3 g cm−3(22 Kalliope). Furthermore, the density distribution appears to be strongly bimodal with volatile-poor (ρ≥ 2.7 g cm−3) and volatile-rich (ρ≤ 2.2 g cm−3) bodies. Finally, our survey along with previous observations provides evidence in support of the possibility that some C-complex bodies could be intrinsically related to IDP-like P- and D-type asteroids, representing different layers of a same body (C: core; P/D: outer shell). We therefore propose that P/ D-types and some C-types may have the same origin in the primordial trans-Neptunian disk.

Highlights

  • Before the advent of the SPHERE/ZIMPOL instrument at the VLT (Beuzit et al 2019), only a handful of the largest main-belt asteroids (e.g., (1) Ceres, (2) Pallas, (4) Vesta, (52) Europa, (511) Davida) had been the subject of in-depth studies using the firstgeneration high-angular-resolution imaging systems operating in Tables A.2 and A.3 are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc. u-strasbg.fr/viz-bin/cat/J/A+A/654/A56Based on observations made with ESO Telescopes at the Paranal Observatory under programme ID 199.C-0074

  • VLT/NACO and Keck/NIRC2 imaging data had been collected for many D ≥ 100 km asteroids, these data were rarely acquired with excellent seeing conditions and/or when the targets were at opposition, leading to suboptimal resolution for the observations of these bodies (Hanuš et al 2017)

  • The volume equivalent diameters were determined as follows. For those targets whose surface coverage was lower than 80%, we relied on the All-Data Asteroid Modeling (ADAM) diameter value only, whereas for the remaining cases we computed the average of the ADAM and Multi-resolution PhotoClinometry by Deformation (MPCD) diameters

Read more

Summary

Introduction

Before the advent of the SPHERE/ZIMPOL instrument at the VLT (Beuzit et al 2019), only a handful of the largest main-belt asteroids (e.g., (1) Ceres, (2) Pallas, (4) Vesta, (52) Europa, (511) Davida) had been the subject of in-depth studies using the firstgeneration high-angular-resolution imaging systems operating in Tables A.2 and A.3 are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc. u-strasbg.fr/viz-bin/cat/J/A+A/654/A56. VLT/NACO and Keck/NIRC2 imaging data had been collected for many D ≥ 100 km asteroids, these data were rarely acquired with excellent seeing conditions and/or when the targets were at opposition, leading to suboptimal resolution for the observations of these bodies (Hanuš et al 2017) It follows that until recently, the 3D shape, and density, (when combining the volume estimate with available mass estimates) and surface topography of the vast majority of the largest (D ≥ 100 km) main-belt asteroids have remained poorly constrained. Our observations of (4) Vesta have allowed us to recover most of the main topographic features present across its surface, unveiled by the NASA Dawn mission (Fétick et al 2019) This includes the south pole impact basin and its prominent central peak, several D ≥ 25 km-sized craters, and Matronalia Rupes, including its steep scarp and its small and large arcs. We use these constraints to provide partial answers to the questions listed above

Observations
Determination of the 3D shape
Shape analysis
Density
Surface topography
Discussion
How do large impacts affect asteroid shape?
S-types
C-types
Findings
P-types
Conclusions and perspective
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call