Abstract

Abstract Water distributions of a polymer electrolyte fuel cell (PEFC) with 9-parallel channels during operation were visualized using a neutron radiography facility at B4 port in KUR (Kyoto University Research Reactor). An imaging system with a neutron image intensifier (I.I.) was employed for reducing the exposure time, and the water distributions in the in-plane and through-plane directions in the PEFC were alternately obtained every 20 sec. The accumulation processes from the GDL to the channels were confirmed. Water accumulated in the GDL at the cathode and evacuation into the channels started around 5 min. Water tended to accumulate at the edge of the ribs, and accumulated as water drops in the channels. The size of the water drops grew up to 1 mm which was the same size as the channel width and height, and the cell voltage was decreased because the liquid drops disturbed the air supply.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.