Abstract
We present an experimental study concerned with investigations of the two-phase flow in a mock-up of the continuous casting process of steel. A specific experimental facility was designed and constructed at HZDR for visualizing liquid metal two-phase flows in the mold and the submerged entry nozzle (SEN) by means of X-ray radioscopy. This setup operates with the low melting, eutectic alloy GaInSn as model liquid. The argon gas is injected through the tip of the stopper rod into the liquid metal flow. The system operates continuously under isothermal conditions. First results will be presented here revealing complex flow structures in the SEN widely differing from a homogeneously dispersed bubbly flow. The patterns are mainly dominated by large bubbles and large-area detachments of the liquid metal flow from the inner nozzle wall. Various flow regimes can be distinguished depending on the ratio between the liquid and the gas flow rate. Smaller gas bubbles are produced by strong shear flows near the nozzle ports. The small bubbles are entrained by the submerged jet and mainly entrapped by the lower circulation roll in the mold. Larger bubbles develop by coalescence and ascend toward the free surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
