Visualization and analysis of the impinging spray and combustion characteristics in a lateral swirl combustion system (LSCS)

Abstract

A lateral swirl combustion system (LSCS) was proposed to improve the fuel/air mixing and combustion processes, and previous results have validated its excellent combustion performance in direct injection diesel engines. To further explore the fuel/air mixture mechanism of the LSCS, the effects of convex edge height ha = 2–8 mm (corresponding to interferential angle δ = 133°-14°) on the impinging spray and flame were investigated visually in a constant volume combustion system employing high-speed shadowgraph, direct photography and two-color methods. The experimental results suggested that the combustion chamber with ha = 6 mm (δ = 48°) exhibited superior results in terms of total spray area and combustion. Regardless of whether ha increased or decreased from 6 mm, all of which impaired the synthesis result of the wall-flow-guided and interferential effects. Specifically, when the ha was 2 mm, the wall-flow-guided effect was decreased, and the excessive δ corresponding to 133° caused the neighboring wall jets to approximate a head-on collision, which inevitably resulted in the part of fuel accumulation. Modified ha to 8 mm (δ = 14°), the neighboring wall jets developed nearly in the same direction, diminishing the interferential capacity. Similar higher-temperature and higher-soot areas were observed during the burn-out process for ha = 2 and 8 mm compared to what was obtained at ha = 6 mm, except that the bright area of ha = 2 mm was located near the convex edge at the bottom, while ha = 8 mm appeared in a higher position. Therefore, the LSCS, through exerting the comprehensive effects of wall-flow-guided and interferential interactions, obtains the optimal fuel/air mixing and combustion effects.