Abstract
This paper describes a control scheme for a robotic manipulator system which uses visual information to position and orientate the end-effector. In the scheme the position and the orientation of the target workpiece with respect to the base frame of the robot are assumed to be unknown, but the desired relative position and orientation of the end-effector to the target workpiece are given in advance. The control system directly integrates visual data into the servoing process without subdividing the process into determination of the position, orientation of the workpiece and inverse kinematic calculation. An artificial neural network system is used for determining the change in joint angles required in order to achieve the desired position and orientaion. The proposed system can control the robot so that it approach the desired position and orientaion from arbitary initial ones. Simulation for the robotic manipulator with six degrees of freedom is done. The validity and the effectiveness of the proposed control scheme are varified by computer simulations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.