Abstract
AbstractThe saturates, aromatics, and resins fractions of maltenes from upgraded oils obtained by slurry‐phase hydrocracking (SPH) under low‐severity reaction conditions using analytical‐grade and mineral catalysts were obtained by chromatographic separation. The reactions in the SPH at low severity with the catalysts used occur by free radicals, and their subsequent hydrogenation is from heavier fractions (asphaltenes and resins) to lighter fractions (aromatics, saturates, and light cuts). The degree of conversion depends on the type of catalyst used (Mo > Fe) and is also proportional to the active metal content of the catalyst. The enhanced conversion of aromatics and resins towards the saturates fraction depends on the hydrogenation capacity of the catalyst. The better flow properties of the maltenes are due to the conversion of heavier to lighter fractions and to the upgrading of the resins fraction properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.