Abstract
This study proposes a characterization technique for a viscoelastic coating layer on a metal substrate immersed in water based on ultrasonic interference and critical attenuation phenomena. Theoretical analysis shows that the reflection spectrum for the normal incidence wave has local minima at the resonance frequencies of the coating layer, which provide its elastic property if the layer thickness is given a priori. Furthermore, it is revealed that the lower envelope of the reflection spectrum takes a minimum, whose frequency can be related to the critical attenuation condition. This feature implies a possibility that the viscous property of the coating material can be estimated by similarly measuring a characteristic frequency to the estimation of the elastic property. Two bonded specimens consisting of polycarbonate (PC) sheets and metal substrates were prepared to validate the proposed method. The reflection spectra measured for the normal wave incidence showed multiple local minima and critical attenuation, which are predicted to appear by theoretical predictions. The wave velocities and loss factors of PC estimated from the two specimens are in fair agreement with the properties shown in the previous paper. This result demonstrates that the ultrasonic interference and critical attenuation behavior can be applied to the characterization of the viscoelastic coating layers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.