Virtual planning and 3D-printed guides for mandibular reconstruction: Factors impacting accuracy.

Abstract

Examine accuracy and factors impacting accuracy for mandibular reconstruction with virtual surgical planning, 3D printed osteotomy guides and preoperatively bent mandibular reconstruction plate (VSP/3Dprinted-guide/plate). Retrospective review of osseous-free-flap mandibular reconstructions with VSP/3Dprinted-guide/plate between January 2015 and July 2020 at a single academic medical center.Patient demographics, disease, and treatment variables were extracted. Accuracy was assessed by 3D-model-overlay with cephalometric and donor-bone segment length measurements. Multivariate analyses were performed to determine factors impacting cephalometric accuracy. 60 cases met criteria: 41 (68%) cancer, 14 (23%) osteoradionecrosis (ORN), 5 (8%) secondary mandibular reconstruction. Thirteen cases (22%) were Brown class III or IV. Thirty-nine cases (65%) had ≥2 flap bone segments. Average donor-bone length was 82 mm (SD: 28). 3D-model-overlay accuracy demonstrated minimal deviation between planned and actual reconstruction: intercondylar distance=2.10 mm (SD: 2.2); intergonial distance=2.23 mm (SD: 1.9); anterior-posterior distance (APD)=1.76 mm (SD: 1.5); gonial angle (GA)=3.11 degrees (SD: 2.4). Mean change in donor-bone segment length inferiorly was 2.67 mm (SD: 2.6) and superiorly 3.27 mm (SD: 3.2). Higher number of donor-bone segments was associated with decreased accuracy in GA (p= .023) and longer donor-bone length was associated with decreased accuracy in APD (p= .031). To our knowledge this is the largest series assessing surgical accuracy of VSP/3Dprinted-guide/plate for osseous-free-flap mandibular reconstruction. We demonstrate highly accurate results, with increased number of donor-bone segments and donor-bone length associated with decreased accuracy. Our findings further support VSP/3Dprinted-guide/plate as a reliable and accurate tool for mandibular reconstruction. Level 4.