Abstract
A device/system V CK is built to replace the physical damper/springs of the VIVACE Converter with virtual elements. VIVACE harnesses hydrokinetic energy of currents by converting mechanical energy of cylinders in Vortex Induced Vibrations (VIV) into electricity. V CK enables conducting high number of model tests rapidly as damping/springs are set by software rather than hardware. V CK consists of a cylinder, a belt–pulley transmission, a motor/generator, and a controller. The controller provides a damper–spring force feedback using displacement/velocity measurements, thus introducing no artificial force–displacement phase lag, which biases energy conversion. Damping is nonlinear, particularly away from the system natural frequency, and affects modeling near the VIV synchronization ends. System identification (SI) in air reveals nonlinear viscous damping, static and dynamic friction. Hysteresis, occurring in the zero velocity limit, is modeled by a nonlinear dynamic damping model Linear Autoregression with Nonlinear Static model (LARNOS). SI performed in air is verified using monochromatic excitation in air and VIV tests in water using physical damper and springs. A resistor bank added to the device provides an integrated V CK /Power Take-Off (PTO) system. VIV testing is performed in the Low Turbulence Free Surface Water Channel of the University of Michigan at 40,000< Re<120,000 and damping 0<ζ<0.16.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
