Abstract
In this article, the structural and magnetic behavior of Cobalt (Co) thin films deposited on flexible Kapton substrates by means of magnetron sputtering technique at ambient temperature are investigated. In order to reveal the impact of Co structure, the case of as-deposited and buffer-layered Co films are studied. The structural characterization was carried out by X-ray diffraction showing the HCP structure of Co. Scanning electron microscopy was conducted to reveal the morphological characteristics of the samples. The magnetic characterization has been performed by means of vibrating sample magnetometry at ambient conditions. Both systems of Co films were subjected in a wide range of applied strains using a newly constructed sample holder in order to investigate the Villari effect. Upon the progressive increase of strain, the magnetization of Co films exhibits a non-monotonic behavior with a local maximum between 2 and 3%. This non-monotonic behavior of magnetization is ascribed to the possible interplay of two main mechanisms. The first mechanism relies on the change of the interatomic distances in the crystal structure at relatively low values of the experienced strain by Co films. The second mechanism is based on the microstructural modification of Co grains as strain exceeds a certain value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.