Viewing-Angle-Enhanced and Dual-View Compatible Integral Imaging 3D Display Based on a Dual Pinhole Array.

Abstract

Conventional integral imaging (InIm) three-dimensional (3D) display has the defect of a small viewing angle and usually presents a single 3D image. In this paper, we propose a viewing-angle-enhanced and dual-view compatible InIm 3D display system. The crosstalk pixel areas within the conventional elemental images (EIs) that result in image crosstalk were effectively utilized either for viewing angle enhancement or for dual-view 3D display. In the viewing-angle-enhanced 3D display mode, a composite elemental image (CEI) that consisted of a normal EI and two view-enhanced EIs was imaged by a dual pinhole array and formed an extended 3D viewing area. A precisely designed mask array was introduced to block the overlapped rays between adjacent viewing areas to eliminate image crosstalk. While in the dual-view 3D display mode, a CEI was composed of image information of two different 3D scenes. With the help of the dual pinhole array and mask array, two different 3D images were reconstructed for the left and right perspectives. Experiments demonstrated that both the left and right sides were increased by 6 degrees from the conventional 3D viewing angle, and also, a dual-view 3D display effect that retains the same viewing angle as the conventional system was achieved. The proposed system has a compact structure and can be freely switched between two display modes.