Abstract

During high-speed machining, the vibration will result in poor workpiece surface and damage the cutting tool as well as the machine tool. It will limit the productivity and lower the quality of thin-wall titanium alloy components. Moreover, vibration occurrence is strongly affected by the dynamic response of the whole system, particularly the stiffness of workpiece-fixture system. Improper fixture layout is prone to generate vibration, especially for the flexible workpiece. Hence, it’s necessary to suppress the vibration and improve the fixture design. In this work, a finite element model of the workpiece-fixture system is built. Based on this model, the laws of the natural frequency and vibration modals under different fixturing methods are obtained, which can be used to refine fixture design. With several additional auxiliary supports, the stiffness of the workpiece-fixture system is improved and the result showed that, the natural frequencies of thin-wall titanium alloy components can be improved to a level which is too high to be reached by tool’s excitation. The result of this study is helpful to design the optimum fixture scheme of thin-wall titanium alloy components.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.