Abstract
Overhead cranes are widely used to transport heavy loads, and their efficient operation requires fast and accurate positioning. However, residual vibration which prevents positioning accuracy generally tends to be induced by fast transportation. In previous paper, we proposed a control method which is based on the characteristic that the residual vibration is completely suppressed in a linear undamped system when excited by an external force which does not contain the natural frequency component of the system. To apply this characteristic to nonlinear damped systems, we defined the apparent external force which includes the influence of system nonlinearity and damping. It was confirmed that the residual vibration of a double pendulum type system model of crane can be suppressed by eliminating two natural frequency components from each the apparent external forces. In this paper, in addition, to improve the robustness for a double pendulum type system against the estimation error, new conditions are added to reduce the component around the natural frequencies from each of the two apparent external forces. The effectiveness of these conditions for robustness is verified through numerical simulations. Furthermore, changes in the robustness are examined when the position of the mass point near the support point of the double pendulum is changed. The results showed that the robustness can be improved in many cases except when the control time is short and the mass point is close to the support point.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have