Abstract
ObjectivesTo apply the MB (multiband) excitation and blipped-CAIPI (blipped-controlled aliasing in parallel imaging) techniques in a spin and gradient-echo (SAGE) EPI sequence to improve the slice coverage for vessel architecture imaging (VAI).Materials and methodsBoth MB excitation and blipped-CAIPI with in-plane parallel imaging were incorporated into a gradient-echo (GE)/spin-echo (SE) EPI sequence for simultaneous tracking of the dynamic MR signal changes in both GE and SE contrasts after the injection of contrast agent. MB and singleband (SB) excitation were compared using a 20-channel head coil at 3 Tesla, and high-resolution MB VAI could be performed in 32 glioma patients.ResultsWhole-brain covered high resolution VAI can be achieved after applying multiband excitation with a factor of 2 and in-plane parallel imaging with a factor of 3. The quality of the images resulting from MB acceleration was comparable to those from the SB method: images were reconstructed without any loss of spatial resolution or severe distortions. In addition, MB and SB signal-to-noise ratios (SNR) were similar. A relative low g-factor induced from the MB acceleration method was achieved after using a blipped-CAIPI technique (1.35 for GE and 1.33 for SE imaging). Performing quantitative VAI, we found that, among all VAI parametric maps, microvessel type indicator (MTI), distance map (I) and vascular-induced bolus peak-time shift (VIPS) were highly correlated. Likewise, VAI parametric maps of slope, slope length and short axis were highly correlated.ConclusionsMultiband accelerated SAGE successfully doubles the number of readout slices in the same measurement time when compared to conventional readout sequences. The corresponding VAI parametric maps provide insights into the complexity and heterogeneity of vascular changes in glioma.
Highlights
Vessel architecture imaging (VAI) MRI is a recently coined term for a technique that noninvasively measures parameters who describe the structural heterogeneity of brain microvasculature [1,2,3,4]
Whole-brain covered high resolution VAI can be achieved after applying multiband excitation with a factor of 2 and in-plane parallel imaging with a factor of 3
The quality of the images resulting from MB acceleration was comparable to those from the SB method: images were reconstructed without any loss of spatial resolution or severe distortions
Summary
Vessel architecture imaging (VAI) MRI is a recently coined term for a technique that noninvasively measures parameters who describe the structural heterogeneity of brain microvasculature [1,2,3,4]. Depending on the structural properties of the microvessels, as well as their oxygen content and spatial arrangement, the different GE and SE images produce an apparent variation in the respective MRI signal readouts [5,6,7,8,9] This effect is based on the varying susceptibility differences between blood vessels and surrounding tissue, as well as on their architecture in general, i.e. their structural alignment, density and the characterization of their vessel segment succession from arterial inflow via capillaries to venous outflow. The loop direction depends on the axes that define the representation plane; in this study, we always plot GE against SE values to acquire vessel vortex curves These curves follow either a clockwise or a counterclockwise direction [1, 2]. If the vascular system contains mostly arteriole-type vessels, the vessel vortices transverse in a clockwise direction [3]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.