Abstract
There is a great interest in wide-bandgap semiconductor devices and most recently in monolithic GaN structures for power electronics applications. In this paper, vertical p-n diodes fabricated on pseudobulk low defect density (10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sup> -10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sup> cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-2</sup> ) GaN substrates are discussed. Homoepitaxial low-pressure metal organic chemical vapor deposition growth of GaN on its native substrate and being able to control and balance the n-type Si doping with background C impurity has allowed the realization of vertical device architectures with drift layer thicknesses of 6 to 40 μm and net carrier electron concentrations of 4 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">15</sup> to 2.5 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">16</sup> cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> . This parameter range is suitable for applications requiring breakdown voltages (BVs) of 600 V-4 kV with a proper edge termination strategy. Measured devices demonstrate near power device figure of merit, that is, differential specific on-resistance (R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sp</sub> ) of 2 mΩcm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> for a BV of 2.6 kV and 2.95 mΩcm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> for a 3.7-kV device, respectively. The improvement in the substrate quality over the last few years has resulted in the fabrication of diodes with areas as large as 16 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , with BVs exceeding 700 V and pulsed (100 μs) currents of 400 A. The structures fabricated are utilized to study in detail the temperature dependency of I-V characteristics, impact ionization and avalanche characteristics, and extract (estimate) modeling parameters such as electron mobility in the GaN c-direction (vertical) and hole minority carrier lifetimes. Some insight into device reliability is also provided.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
