Vertical Phase Regulation with 1,3,5-Tribromobenzene Leads to 18.5% Efficiency Binary Organic Solar Cells.

Abstract

The sequential deposition method assists the vertical phase distribution in the photoactive layer of organic solar cells, enhancing power conversion efficiencies. With this film coating approach, the morphology of both layers can be fine-tuned with high boiling solvent additives, as frequently applied in one-step casting films. However, introducing liquid additives can compromise the morphological stability of the devices due to the solvent residuals. Herein, 1,3,5-tribromobenzene (TBB) with high volatility and low cost, is used as a solid additive in the acceptor solution and combined thermal annealing to regulate the vertical phase in organic solar cells composed of D18-Cl/L8-BO. Compared to the control cells, the devices treated with TBB and those that underwent additional thermal processing exhibit increased exciton generation rate, charge carrier mobility, charge carrier lifetime, and reduced bimolecular charge recombination. As a result, the TBB-treated organic solar cells achieve a champion power conversion efficiency of 18.5% (18.1% averaged), one of the highest efficiencies in binary organic solar cells with open circuit voltage exceeding 900mV. This study ascribes the advanced device performance to the gradient-distributed donor-acceptor concentrations in the vertical direction. The findings provide guidelines for optimizing the morphology of the sequentially deposited top layer to achieve high-performance organic solar cells.