Abstract
This article is dedicated to developing a ground improvement technique using vertically oriented reinforcement elements prefabricated utilizing fiberglass pultruded pipe and helical shape wideners at the bottom toe. Structures of the prefabricated helical micropiles varied by the length and cross-section area introduced into the soil massive as reinforcing bearing elements. The effect of the reinforcements geometry variation was investigated through a reinforcement factor (µ), based on which a calculation method for measuring settlement of reinforced soil has been previously developed Full-scale field plate load tests were performed before and after reinforcing the soil to investigate the changes in the soil stiffness after the reinforcement process. Comparative analysis between the reinforced and reference soft sandy soil indicates an average increase in the deformation properties of the fiber reinforced soils by 8%, 30%, 63% at the applied pressures of 100, 300, and 550 kPa, respectively. The influence of the fiber reinforced polymers (FRP) geometrical properties on the final composite settlement was determined. A comparative analysis of the calculated and the actual plate load tests results reveals that the previously proposed settlement calculation method is adequate for further development.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
