Abstract

The water-bearing body (WBB) behind tunnel linings has been some of the main causes of damage in operational tunnels. The WBB directly affects the serviceability state of tunnel linings; thus, determining a method to detect this problem is a widely studied issue regarding tunnel maintenance. In this paper, a vehicle-borne transient electromagnetic method (VBTEM) is put forward for the first time to detect WBB behind tunnel linings, and the aim is to fully investigate the transient electromagnetic response and numerical characteristics of the WBB behind tunnel linings. Firstly, the transient electromagnetic response curves of the WBB and surrounding rock are obtained and compared in detail by using the finite element method. Then, taking the distance, thickness, radius, and resistivity of the WBB as variable parameters, the parametric sensitivity rule of the response curve of the WBB is analyzed. Finally, a dimensionless response curve is proposed, a mathematical extraction equation is established, and seven numerical characteristic parameters are proposed and extracted. Based on seven numerical characteristic parameters, the technical parameters of the VBTEM equipment are put forward. The results illustrate that the transient electromagnetic response of the WBB is obviously different from that of surrounding rock. The seven numerical characteristic parameters of the dimensionless curve of the WBB can represent the entire response curve of the WBB. The results reveal that the first time gate of the VBTEM equipment needs to be less than 0.05 μs for short-distance problem, and the time span needs to reach four time spans at least. The research results can provide valuable technical references for the application of VBTEM.

Highlights

  • Water is a serious problem in tunnel maintenance [1, 2]

  • If the tunnel waterproofing fails, flowing water will accumulate behind the tunnel lining, which will seriously affect tunnel structure safety. us, the detection of the hidden Water-bearing body (WBB) behind tunnel linings has become highly necessary for tunnel engineers

  • E vehicle-borne transient electromagnetic method (VBTEM) is based on improved detection by the transient electromagnetic method (TEM) in many engineering applications, such as geological advance prediction of tunnels, underground gas storage, and metal mineral exploration [7,8,9,10,11,12,13,14]. e VBTEM has the common characteristics of transient electromagnetic in other fields, and has its differences, which means that some issues need to be discussed before applying VBTEM technology into operational tunnels

Read more

Summary

Introduction

Water is a serious problem in tunnel maintenance [1, 2]. Water-bearing body (WBB) has been proven to exist behind the tunnel linings of many operational tunnels [3, 4]. Us, the detection of the hidden WBB behind tunnel linings has become highly necessary for tunnel engineers To solve this problem, the vehicle-borne transient electromagnetic method (VBTEM) is put forward to detect the hidden WBB behind tunnel linings. The normal surrounding rock and WBB have very different electrical resistivity; the transient electromagnetic technology has the potentiality and ability to detect the normal surrounding rock and WBB behind tunnel linings, and it can even investigate the development scale of the WBB. During the operation of vehicle equipment, a certain frequency and power of transient electromagnetic pulse signal is launched to the tunnel structure and surrounding rock, the special receiver coil receives the transient electromagnetic induction signals of the tunnel structure and surrounding rock. When the vehicle equipment passes through the whole tunnel, the transient electromagnetic induction signal of the whole tunnel can be obtained. rough postprocessing of transient electromagnetic induction signals, the disease characteristics of the tunnel structure can be identified, the spatial location of the corresponding internal disease can be obtained, and the distribution map of the disease in the whole tunnel structure can be determined

Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call