Vat photopolymerization additive manufacturing process modeling: a thermal-chemical coupling approach informed by in-situ and ex-situ characterization data

Abstract

Vat photopolymerization (VPP) is one of the most widely used additive manufacturing methods. The VPP process temperature and material curing reaction interplay with each other to critically determine the final product quality. Insights about the time-varying process temperature and degree of conversion (DoC) is desired for VPP process control but difficult to attain due to lacking effective operando characterization technologies. This work reports a new method to create a thermal-chemical model of the VPP process by solving an inverse heat conduction problem (IHCP) based on in-situ observable temperature measurement to estimate the chemistry reaction-induced heat source that is a function of DoC. Ex-situ photo differential scanning calorimetry (Photo-DSC) characterization is used to initialize the chemistry reaction model parameters so that DoC can be calculated. Specifically, vat substrate temperature is measured using an in-situ infrared thermal camera and used as input to solve an IHCP for estimating exothermic heat generation rate for the internal heat generation component at the curing part. Overall, the newly developed VPP modeling framework combines an IHCP that is optimized by in-situ thermal monitoring with a chemical reaction heat generation and conduction model that is educated by Photo-DSC characterization. The model predictions of temperature and DoC are experimentally validated by comparing against in-situ temperature measurement and ex-situ spectroscopy measurement of prints at different exposure times.