Variations in Capacity at Signalized Intersections with Different Area Types

Abstract

The capacity analysis procedure for signalized intersections included in the Highway Capacity Manual (HCM) needs to consider the area type of a given intersection. The area-type adjustment factor used in the procedure is based on conclusions from a limited number of studies. In addition, the procedure for using an area-type adjustment factor is not well defined in the HCM. A study undertaken in central Florida to study the effects of four different area types on the capacity of signalized intersections is summarized. These four area types include recreational, business, residential, and shopping. Study results indicated that differences in saturation headways among different area types were significant. The saturation headways observed in recreational areas were significantly higher than those in other areas for both left-turn and through movements. The through-movement saturation headways obtained in residential, shopping, and business areas were not significantly different. This study resulted in a new area-type adjustment factor of 0.92 for recreational areas, whereas the factor is 1.00 for other areas. Results in this study also indicated that the differences in start-up lost time among different area types were not significantly different. In addition, according to the results of the analysis, 75 percent of the yellow interval in undersaturated conditions and 35 percent of the yellow interval in oversaturated conditions were found to be unused and considered clearance lost time.