VARIABLE PITCH FAN AERODYNAMIC DESIGN FOR REVERSE THRUST OPERATION

Abstract

Variable pitch low pressure ratio fans could enable higher propulsive efficiency and eliminate the need for heavy thrust reversers. In this paper, the effects of the fan rotor design on reverse thrust capability have been explored by varying key parameters of NASA’s Advanced Ducted Propulsor (ADP) while maintaining cruise point performance. Reverse thrust performance has been assessed using RANS single passage CFD of the variable pitch fan system with an extended domain. This computational approach has been validated using NASA Stage 51B, an experimental variable pitch fan test case. Predicted total pressure and total pressure ratios for this case were found to agree with test data within experimental error, except where large tip region separations occurred at high incidence. Applying individual variations to rotor pitch-to-chord, radial loading distribution, and chordwise camber distribution generated changes to rotor incidence, blockage, and peak surface Mach numbers in reverse operation. An increase in gross reverse thrust of up to 8% was achieved through reductions in rotor pitch-to-chord due to improved loading and lower shock Mach numbers. Controlling section camber distributions was used to move the rotor shock downstream and was found to increase reverse thrust by up to 3%. Increasing rotor loading at the mid span relative to the tip resulted in high tip incidence and a 50% reduction in gross reverse thrust across all rotor speeds. This suggests that tip loaded designs are required for high levels of reverse thrust.