Abstract
This letter presents the design, simulation, fabrication, and successful demonstration of a variable optical attenuator (VOA) based on a micromachined micromirror combined with an optical fiber collimator. The micromirror has a size of 500μm in diameter and a rotational resonance of 4.94kHz. The micromirror was actuated by vertical comb drive which was fabricated by bulk micromachining process on a silicon on insulator (SOI) wafer. The VOA operates at a low driving voltage of 4.4V corresponding to the rotation angle of 0.3°. The turn-on and turn-off response time of the VOA are 1.6ms and 2.74ms, respectively. Finally, the optical attenuation was measured and an optical attenuation as large as 40dB was obtained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Optik - International Journal for Light and Electron Optics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
