Abstract
The design of varactor-loaded transmission-line phase shifters using lumped elements is discussed in this paper. A monolithic-microwave integrated-circuit (MMIC) phase shifter is fabricated to verify the proposed topology. Only one control voltage is required for phase control. Within a continuously adjustable phase-control range of 360/spl deg/ and a frequency range from 5 to 6 GHz, a low transmission loss of 4 dB/spl plusmn/1.7 dB is measured. The phase shifter is realized with a commercial 0.6-/spl mu/m GaAs MESFET process and requires a chip area of only 0.8 mm/sup 2/. To the knowledge of the authors, the best results reported to date are reached for a continuously adjustable passive phase shifter with comparable circuit size. The presented circuit is well suited to wireless adaptive antenna transceivers, operating in accordance with the 802.11a, high-performance radio local-area-network and high-speed wireless-access-network type-a standard.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
