Vapor sensing performances of PVDF nanocomposites containing titanium dioxide nanotubes decorated multi-walled carbon nanotubes

Abstract

Inorganic nanocarbon hybrid materials are good alternatives for superior electrochemical performance and specific capacitance to their traditional counterparts. Nanocarbons act as a good template for the growth of metal nanoparticles on it and their hybrid combinations enhance the charge transport and rate capability of electrochemical materials without sacrificing the specific capacity. In this study, titanium dioxide nanotubes (TNT) are synthesized hydrothermally in the presence of multi-walled carbon nanotubes (MWCNT) where the latter acts as base template material for the metal oxide nanotube growth. The MWCNT–TNT hybrid material possesses very high dielectric strength and this is used to enhance the dielectric property of the polymer polyvinyledene fluoride (PVDF). Solution mixing was used to prepare the PVDF/MWCNT–TNT nanocomposites by varying the filler concentrations from 0.5 to 2.5 wt%. Excellent vapor sensing was noticed for the PVDF nanocomposites with different rate of response towards commonly used laboratory solvents. The composites and the fillers were characterized for its morphology and structural properties using scanning and transmission electron microscopy, X-ray diffraction studies and infrared spectroscopy. Vapor sensing was measured as relative resistance variations against the solvent vapors, and the dielectric properties of the composites were measured at room temperature during the frequency 102–107 Hz. Experimental results revealed the influence of filler synergy on the properties of PVDF and the enhancement in the solvent vapor detectability and dielectric properties reflects the ability of these composite films in flexible vapor sensors and in energy storage.