Abstract

Plasma spray-physical vapor deposition (PS-PVD) is a low pressure plasma spray technology recently developed by Sulzer Metco AG (Switzerland) to deposit coatings out of the vapor phase. PS-PVD is developed on the basis of the well established low pressure plasma spraying technology. In comparison to conventional vacuum plasma spraying and low pressure plasma spraying, these new processes use a high energy plasma gun operated at a work pressure below 2 mbar. This leads to unconventional plasma jet characteristics, which can be used to obtain specific and unique coatings. An important new feature of PS-PVD is the possibility to deposit a coating not only by melting the feed stock material, which builds up a layer from liquid splats, but also by vaporizing the injected material. Therefore, the PS-PVD process fills the gap between the conventional PVD technologies and standard thermal spray processes. The possibility to vaporize feedstock material and to produce layers out of the vapor phase results in new and unique coating microstructures. The properties of such coatings are superior to those of thermal spray and electron beam-physical vapor deposition (EB-PVD) coatings. In contrast to EB-PVD, PS-PVD incorporates the vaporized coating material into a supersonic plasma plume. Due to the forced gas stream of the plasma jet, complex shaped parts like multi-airfoil turbine vanes can be coated with columnar thermal barrier coatings using PS-PVD. Even shadowed areas and areas, which are not in the line-of-sight to the coating source, can be coated homogeneously. This paper reports on the progress made by Sulzer Metco to develop a thermal spray process to produce coatings out of the vapor phase. Columnar thermal barrier coatings made of yttria stabilized zircona are optimized to serve in a turbine engine. This includes coating properties like strain tolerance and erosion resistance but also the coverage of multiple air foils.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call