Vapor Phase Deposition of Functional Polymers onto Paper-Based Microfluidic Devices for Advanced Unit Operations

Abstract

Paper-based microfluidic devices have recently received significant attention as a potential platform for low-cost diagnostic assays. However, the number of advanced unit operations, such as separation of analytes and fluid manipulation, that can be applied to these devices has been limited. Here, we use a vapor phase polymerization process to sequentially deposit functional polymer coatings onto paper-based microfluidic devices to integrate multiple advanced unit operations while retaining the fibrous morphology necessary to generate capillary-driven flow. A hybrid grafting process was used to apply hydrophilic polymer coatings with a high surface concentration of ionizable groups onto the surface of the paper fibers in order to passively separate analytes, which allowed a multicomponent mixture to be separated into its anionic and cationic components. Additionally, a UV-responsive polymer was sequentially deposited to act as a responsive switch to control the path of fluid within the devices. This work extends the advanced unit operations available for paper-based microfluidics and allows for more complex diagnostics. In addition, the vapor phase polymerization process is substrate independent, and therefore, these functional coatings can be applied to other textured materials such as membranes, filters, and fabrics.