Valorization of tannery solid wastes for sustainable enzyme induced carbonate precipitation process

Abstract

Biocementation via enzyme induced carbonate precipitation (EICP) is an emerging ground improvement technique that utilizes urease for calcium carbonate precipitation. Usage of expensive laboratory grade chemicals in EICP hinders its implementation at field level applications. In this study, the feasibility of utilizing solid wastes generated from leather industry was investigated for EICP process. Initially, the proteinaceous fleshing waste was used as nitrogen source for production of an extracellular urease from Arthrobacter creatinolyticus MTCC 5604 followed by its subsequent use in EICP with suspended solids of tannery lime liquor, as alternative calcium source. The calcium ion solution was prepared by treating suspended solids of lime liquor with 1 N HCl. The EICP was optimum with 1000 U of urease, 1.0 M urea and 1.0 M CaCl2.2H2O for test tube experiments. Sand solidification experiments under optimal conditions with five times addition of cementation solution yielded a maximum unconfined compressive strength (UCS) of 810 kPa with laboratory grade CaCl2.2H2O and 780 kPa with calcium from lime liquor. The crystalline phases and morphology of the CaCO3 precipitate were analyzed by XRD, FTIR and SEM-EDX. The results showed the formation of more stable calcite in EICP with calcium obtained from lime liquor, while calcite and vaterite polymorphs were obtained with CaCl2.2H2O. Utilization of fleshing waste and lime liquor in EICP could reduce the pollution load and sludge formation that are generated during the pre-tanning operations of leather manufacturing. The results indicated the viability of process to achieve cost effective and sustainable biocementation for large scale applications.