Abstract
Phosphogypsum is an industrial waste considered as naturally occurring radioactive material. Stack disposal and exposure to the environmental condition involve the production of acid leachates with high potential pollutant loads as heavy metals and radionuclides. In this study, a sequential neutralisation process was applied for cleaning the generated releases, and the two obtained residues were characterised from the physical-chemical and radiological point of view before their valorisation. The cleaning process was made up of two steps: the first one using calcium carbonate until pH = 3.5, and the second one using calcium hydroxide until pH = 12. The residue obtained in the first step was mostly calcium fluoride, while in the second step most phosphates were precipitated, mainly as hydroxyapatite. The final liquid was treated to reduce pH lower than 9, which is the limit included in the current directive for discharges of liquid effluents into coastal waters. The main conclusion was that the solids from the first step could be valorised as an additive in the manufacture of commercial Portland cements and ceramics, while the solids from the second step could be used as raw material for the phosphoric acid manufacture.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.