Validation of the NeoFilm for Yeast and Mold Method for Enumeration of Yeasts and Molds in Select Foods.

Abstract

NeoFilm Yeast and Mold (Y&M), also known as Sanita-kun Yeasts and Molds, is a simple, effective device used for the enumeration of yeasts and molds. It consists of a nonwoven fabric on which a layer of microbial nutrients is deposited in a film. A 1 mL sample homogenate is applied to the membrane and this, in turn, is incubated for 48-72 h at 25°C. Sample homogenates were prepared using two different diluents for customer convenience: phosphate buffered saline (PBS) and 0.1% peptone water. In comparative testing of breaded chicken nuggets, dry pet food, orange juice concentrate, yogurt, and cake mix, there were statistically significant differences in the counts obtained by the NeoFilm Y&M and U.S. Food and Drug Administration Bacteriological Analytical Manual reference culture methods only in the following instances: medium level for orange juice with PBS as diluent and low level for pet food with 0.1% peptone water as diluent, where reference method counts were higher than those of NeoFilm; medium level for cake mix with PBS, and low and medium levels for cake mix with 0.1% peptone water, where NeoFilm produced higher counts than the reference method. In addition to the method comparison study with five matrixes, robustness and stability/lot-to-lot testing were also performed. Results of robustness testing showed no significant effect on results even with perturbation to three assay parameters simultaneously. Results of testing of three lots of devices ranging in age from 2 to 26 months post-manufacture showed no significant differences in performance.