Abstract
The DALTON-THERMIX code system has been developed for safety analysis and core optimization of pebble-bed reactors. The code system consists of the new three-dimensional diffusion code DALTON, which is coupled to the existing thermal-hydraulic code THERMIX. These codes are linked to a database procedure for the generation of neutron cross sections using SCALE-5.The behavior of pebble-bed reactors during a loss of forced cooling (LOFC) transient is of particular interest since the absence of forced cooling could lead to a significant increase of the temperature of the coated particle fuel. Therefore, the reactor power may be constrained during normal operation to limit the temperature.For validation purposes, calculation results of normal operation, an LOFC transient, and a control rod withdrawal transient without SCRAM have been compared with experimental data obtained in the High Temperature Reactor–10 (HTR-10). The code system has been applied to the 400-MW(thermal) pebble bed modular reactor (PBMR) design, including the analysis of three different LOFC transients. Theses results are verified by a comparison with the results of the existing TINTE code system.It was found that the code system is capable of modeling both small (HTR-10) and large (PBMR) pebble-bed reactors and therefore provides a flexible tool for safety analysis and core optimization of future reactor designs. The analyses of the LOFC transients show that the peak fuel temperature is only slightly elevated (less than +100°C) as compared to its nominal value in the HTR-10 but reaches a maximum value of 1648°C during the depressurized LOFC case of the PBMR benchmark, which is significantly higher than the peak fuel temperature (976°C) during normal operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.