Abstract

abstract The antiparkinson agent pramipexole dihydrochloride monohydrate was quantified in pharmaceutical products by high performance liquid chromatography (HPLC) and derivative spectrophotometry. The first method was based on HPLC using tamsulosin HCl as an internal standard. In this method, chromatographic separation was achieved using a LiChrospher 60 RP column at 25°C, with a flow rate of 1.0 mL/min at 263 nm. The eluent comprised 0.01 mol/L ammonium acetate (pH 4.4) and acetonitrile (35:65 by volume). The linearity range was found to be 10.0-30.0 µg/mL with a mean recovery of 100.5 ± 1.10. The limit of detection (8 ng/mL) and limit of quantification (50 ng/mL) were calculated. In the second method, the first derivative spectrophotometric technique for the determination of pramipexole dihydrochloride monohydrate was performed by measuring the amplitude at 249 and 280 nm. In the first derivative technique, the absorbance and concentration plot was rectilinear over the 5.0-35.0 µg/mL range with a lower detection limit of 1.5 ng/mL and quantification limit of 4.5 ng/mL. The typical excipients included in the pharmaceutical product do not interfere with the selectivity of either method. The developed methods were validated for robustness, selectivity, specificity, linearity, precision, and accuracy as per the ICH and FDA guidelines (ICH Q2B, 1996; FDA,2000). In conclusion, the developed methods were successful in determining the quantity of the antiparkinson agent pramipexole dihydrochloride monohydrate in pharmaceutical products. The RSD values for the pharmaceutical product used in this study were found to be 0.97% for the HPLC method and 0.00% for the first derivative spectrophotometric method.

Highlights

  • The chemical name of pramipexole dihydrochloride monohydrate is (6S)-6-N-propyl-4,5,6,7-tetrahydro-1,3benzothiazole-2,6-diamine dihydrochloride monohydrate (Figure 1)

  • Two newly developed techniques were proposed for pramipexole dihydrochloride monohydrate assay in pharmaceutical dosage forms

  • The best resolution was achieved when using a mobile phase consisting of ammonium acetate: acetonitrile (35:65, by volume)

Read more

Summary

Introduction

The chemical name of pramipexole dihydrochloride monohydrate is (6S)-6-N-propyl-4,5,6,7-tetrahydro-1,3benzothiazole-2,6-diamine dihydrochloride monohydrate (Figure 1). The objective of the present study was to develop and validate a new simple, efficient, selective, precise, and reproducible method for routine quality control analyses of commercial pharmaceutical dosage forms containing pramipexole. Both HPLC and the spectrophotometric methods have been widely applied because they sensitive, reproducible, and precise. Pramipexole alleviates parkinsonian motor deficits by stimulation of dopamine receptors in the striatum. It may be used as monotherapy or in combination with levodopa. Pramipexole is indicated for the treatment of the signs and symptoms of idiopathic Parkinson’s disease and the symptomatic treatment of idiopathic Restless Legs Syndrome (Physicians’ Desk Reference, 2013)

Objectives
Methods
Results
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call