Abstract
In this study, the characteristics of clicking-type noise and vibration occurring in the automotive heating, ventilation and air conditional (HVAC) systems are investigated. A lab-scale model of HVAC system is developed, and validation is carried out with a vehicle system. A fixed blower speed of 1 (at an airflow of 2.53 m/s) with alternated air conditional (AC) was implied in this study. Three different sensors namely as tachometer, accelerometer, and microphone were used to measure and prove the existing noise in the HVAC system. The study inferred that the compressor contributed significantly to the total vibration and noise in the HVAC system. Other components such as AC pipe, evaporator, and thermal expansion valve (TXV) also contributed to a slight extent. The clicking noise was observed in the operating frequency range of 200 ~ 300 Hz. This noise and vibration issues are partly influenced by the running conditions of the AC and the effect was significant when the AC was turned on. The validation of the findings in the model shows a good agreement with the results obtained in the vehicle system, whereby the clicking noise and vibration can be observed at a similar frequency range.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Automotive and Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.