Abstract
Systems for studying the toxicity of metal aggregates on the airways are normally not suited for evaluating the effects of individual particle characteristics. This study validates a set-up for toxicological studies of metal aggregates using an air–liquid interface approach. The set-up used a spark discharge generator capable of generating aerosol metal aggregate particles and sintered near spheres. The set-up also contained an exposure chamber, The Nano Aerosol Chamber for In Vitro Toxicity (NACIVT). The system facilitates online characterization capabilities of mass mobility, mass concentration, and number size distribution to determine the exposure. By dilution, the desired exposure level was controlled. Primary and cancerous airway cells were exposed to copper (Cu), palladium (Pd), and silver (Ag) aggregates, 50–150 nm in median diameter. The aggregates were composed of primary particles <10 nm in diameter. For Cu and Pd, an exposure of sintered aerosol particles was also produced. The doses of the particles were expressed as particle numbers, masses, and surface areas. For the Cu, Pd, and Ag aerosol particles, a range of mass surface concentrations on the air–liquid interface of 0.4–10.7, 0.9–46.6, and 0.1–1.4 µg/cm2, respectively, were achieved. Viability was measured by WST-1 assay, cytokines (Il-6, Il-8, TNF-a, MCP) by Luminex technology. Statistically significant effects and dose response on cytokine expression were observed for SAEC cells after exposure to Cu, Pd, or Ag particles. Also, a positive dose response was observed for SAEC viability after Cu exposure. For A549 cells, statistically significant effects on viability were observed after exposure to Cu and Pd particles. The set-up produced a stable flow of aerosol particles with an exposure and dose expressed in terms of number, mass, and surface area. Exposure-related effects on the airway cellular models could be asserted.Graphical Electronic supplementary materialThe online version of this article (doi:10.1007/s11051-016-3389-y) contains supplementary material, which is available to authorized users.
Highlights
Systems for studying the toxicity of metal aggregates on the airways are normally not suited for evaluating the effects of individual particle characteristics
The airborne particles were produced by a spark discharge generator, and several techniques were used for characterizing the particles both online and offline
The exposure to the Nano Aerosol Chamber for In Vitro Toxicity (NACIVT) with regard to the number size distribution, total particle number, and mass concentration showed that the flow of aerosol particles was stable during the course of the 1-hour exposure period at high enough outputs to generate a measureable toxic response
Summary
Systems for studying the toxicity of metal aggregates on the airways are normally not suited for evaluating the effects of individual particle characteristics. The set-up used a spark discharge generator capable of generating aerosol metal aggregate particles and sintered near spheres. Broberg Division of Occupational and Environmental Medicine, Department of Laboratory Medicine, Lund University, 221 00 Lund, Sweden. E. Messing Department of Physics, Solid State Physics, Lund University, 221 00 Lund, Sweden. For Cu and Pd, an exposure of sintered aerosol particles was produced. For the Cu, Pd, and Ag aerosol particles, a range of mass surface concentrations on the air–liquid interface of 0.4–10.7, 0.9–46.6, and 0.1–1.4 lg/cm, respectively, were achieved. Significant effects and dose response on cytokine expression were observed for SAEC cells after exposure to Cu, Pd, or Ag particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.