Validation of a numerical method for predicting shear deformation of reinforced concrete beams

Abstract

The objective of this paper is to validate a 2D nonlinear finite element (FE) model for estimating the post-cracking shear deformation of reinforced concrete (RC) beams. The proposed FE model treated the cracked concrete as an orthotropic material in the framework of the fixed-crack approach. The experimental data for both the overall response (including the total and shear-induced deflection) and the detailed response (including the mean shear strain, mean vertical strain and principal compressive strain angle) of five I-section RC beams, monitored by the main authors of this paper with the Digital Image Correlation technique, were used to verify the proposed model. In addition, 27 further test beams evaluated in independent research programs were collected to assemble a database. The proposed FE model was further verified against the database. Two additional FE models (the rotating-crack model developed in this work and Response-2000 developed by Bentz (2000)) were also evaluated by simulating the detailed responses of the beams in the database. The results obtained validate the proposed FE model for predicting the post-cracking shear deformation of RC beams and indicate that the proposed FE model is more suitable for simulating the shear behaviour of RC beams than the rotating-crack model or Response-2000.