Abstract
The discrete element model (DEM) is a very promising modelling strategy for two-phase granular systems. However, owing to a lack of experimental measurements, validation of numerical simulations of two-phase granular systems is still an important issue. In this study, a small two-dimensional gas-fluidized bed was simulated using a discrete element model. The dimensions of the simulated bed were 44 mm × 10 mm × 120 mm and the fluidized particles had a diameter d p = 1.2 mm and density ρ p = 1000 kg/m 3. The comparison between DEM simulations and experiments are performed on the basis of time-averaged voidage maps. The drag-law of Beetstra et al. [Beetstra, R., van der Hoef, M. A., & Kuipers, J. A. M. (2007b). Drag force of intermediate Reynolds number flow past mono- and bidispersed arrays of spheres. AIChE Journal, 53, 489–501] seems to give the best results. The simulations are fairly insensitive to the coefficient of restitution and the coefficient of friction as long as some route of energy dissipation during particle–particle and particle–wall contact is provided. Changing the boundary condition of the gas phase at the side-walls from zero-slip to full-slip does not affect the simulation results. Care is to be taken that the cell sizes are chosen so that a reasonable number of particles can be found in a fluid cell.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
