Validation of a closure model framework for turbulent bubbly two-phase flow in different flow situations

Abstract

Abstract In the present paper a set of closure relations for interphase momentum exchange and for bubble-induced turbulence within the Euler-Euler framework is presented and validated against a set of tests performed at the HZDR-facility MT-Loop. The facility was equipped with wire-mesh sensors that allow cross sectional distributions of gas fraction, gas velocity, and bubble sizes to be measured at different distances from the gas injection. The here applied models were derived for the simulation of fully developed turbulent vertical upward bubbly flow in a pipe. The radial gas fraction profile for this kind of flow is the result of the ratio of the radial force components of the so-called non-drag forces and can be used for model validation. However, only the ratio, not the absolute value of the bubble forces can be tested in this way. In the present paper more detailed information from the experiment is exploited by consideration of the evolution of gas fraction distribution particularly after the gas injection region. The change of cross sectional gas volume fraction distribution is the result of the action of non-drag forces. In addition to vertical pipe flow tests further insight is obtained from the investigation of the effect of a slight tube inclination which shifts the gas distribution. Here the disturbance of the cylindrical symmetry of a vertical pipe gives hints on the absolute value of the non-drag force components. The results show that the presented model framework at least is able to describe the phenomena qualitatively. Possible reasons for quantitative deviations are discussed and require further investigations.