Validation and Limits of Finite Inflatable Beam Elements

Abstract

AbstractAlthough nowadays inflatable tubular beams are often used in the field of civil engineering, by now there are only few publications dealing with finite deformation inflatable beam elements, see e.g. [1], [2] and [3]. All formulations of inflatable beams have several assumptions in common, as constant cross sections throughout the deformation, a constant internal gas pressure and the negligence of circumferential stresses. These assumptions have to be validated either by experiments or numerical analysis. In the current contribution beam–like structures are investigated using a finite element shell or membrane formulation and featuring a volume dependent gas loading, see e.g. [5] and [4]. In general the formulation substitutes the internal gas pressure by an energetically equivalent volume dependent loading and thus enables to check for potential gas pressure changes during the deformation process of the inflated beam as a consequence of volume changes. Further local deformations as occurring in the vicinity of supports or almost single loads can be considered. In this paper the focus will be only on the initial assumption of the beam theory that the biaxial stress state is neglected. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)