Abstract
Two sensitive, selective, and precise stability-indicating, high-performance liquid chromatography and high-performance thin-layer chromatography methods have been developed for the determination of alfuzosin hydrochloride in the presence of its degradation products. Alfuzosin.HCl was subjected to stress alkaline, acidic, oxidative, thermal, and photo-degradation. The drug could be well separated from the degradation products upon applying the two methods. Separation by HPLC was achieved using an Xterra RP18 column and acetonitrile/0.02 M KH2PO4 (pH=3) in a ratio of 20:80 as mobile phase. The flow rate was 1 mL/min. The linearity range was 0.25 to 11 microg/mL with mean percentage recovery of 100.26 +/- 1.54. The HPTLC method used ALUGRAM Nano-SIL silica gel 60 F254 plates; the optimized mobile phase was methanol/ammonia (100:1.2). Quantitatively the spots were scanned densitometrically at 245 nm. A second order polynomial equation was used for the regression. The range was 0.5-7 microg/spot. The mean percentage recovery was 100.13 +/- 1.67. Two main degradation products were obtained in most stress conditions, separated, and identified by FT-IR and NMR spectral analysis, from which the degradation pathway was proposed. The two methods were validated according to the International Conference on Harmonization. In addition, the HPLC method was used to study the kinetics of alkaline and acid degradation of the drug.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.