Abstract
The purpose of this paper is to describe a thoroughly dry lithography using plasma polymerization and plasma etching. The new lithography is named vacuum lithography because all processes are performed at reduced pressures. Resist films were formed in bell-jar-type and argon-flow-type reactors. The controllability of plasma polymerization is discussed with respect to the type of reactor and gas mixture. A pattern was delineated in the resist using an electron beam, and it was developed by plasma etching with a mixture of argon and oxygen. It was found that the quality of the plasma-polymerized resist depends strongly on the polymer structure and on the plasma etching conditions. In this experiment, the recorded values of sensitivity and γ value of plasma-polymerized methyl methacrylate were 700 µC/cm2 and 1, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
