Abstract
A new approach has been developed to characterize bifunctional catalysts in a complex matrix of hydrotreated vacuum gas oil using a batch reactor test. Triphasic reactions were carried out in a reactor equipped with a stationary basket, hydrogen injection and products sampling systems. Bifunctional catalysts containing different relative amounts of alumina-supported NiMo sulfide and zeolite were tested at 400°C under 120 bars over different reaction times. The repeatability of the test conditions was validated and the lack of mass transfer limitations at phase interfaces was confirmed. Gas and liquid samples were analyzed by one and two-dimensional gas chromatography (GC×GC) respectively to obtain quantitative distributions of linear and branched paraffins, naphthenes and aromatics. The details of the products distribution provided by chromatography were explained using mechanisms of bifunctional catalysis. It has been established that the limiting step defining the total conversion is the scission of the hydrocarbon chains on acid sites of the zeolite. The increase of the molybdenum to zeolite ratio provided an improvement of middle distillate selectivity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
