Abstract
The extraction conditions for the accurate determination of oxygen in gadolinium, terbium and iron-terbium alloy using vacuum fusion analysis were studied. The influence of the gettering effect, the analyzing temperature and the weight ratio of the bath metal to the sample were investigated. Oxygen values of gadolinium and terbium were measured by the graphite crucible, the graphite capsule, the tin bath, the iron-tin bath and the platinum-tin bath techniques in the temperature range of 1500–2100 °C using vacuum fusion analysis. These oxygen values were compared with those obtained by inert gas fusion analysis. In inert gas fusion analysis, the samples were analyzed with iron and tin in a tin capsule, and the samples with platinum in a tin capsule were analyzed in a graphite capsule enclosing with carbon powder. Oxygen values of both metal samples in the graphite capsule at 2000 °C, with an iron-tin bath at 1850 °C and a platinum-tin bath at 2000 °C in vacuum fusion analysis, were respectively in good agreement within their errors; the oxygen values of gadolinium were also in good agreement with that from inert gas fusion analysis in the iron-tin bath, but those of terbium were not in agreement. This agreement for gadolinium guarantees the reliability of the conditions for the accurate determination, and the difference of oxygen values for terbium suggests a need for further consideration on the conditions of the inert gas fusion analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
