Abstract
Vacuum brazing of super-Ni/NiCr laminated composite and Cr18–Ni8 steel was performed using NiCrP filler metal. Microstructure, elemental distribution, microhardness and shear strength were investigated by means of scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and electromechanical universal testing machine. An excellent joint was obtained at 1040 °C for 20 min and the shear strength was as high as 137 MPa. The brazed region was divided into solid solution zone and eutectic zone. Elemental distribution indicated that P mainly concentrated in the eutectic zone in the form of Ni 3P. Ni 2Cr particles precipitated in NiCr base layer under the influence of thermal cycling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
