Vacancy and doping engineering of Ni-based charge-buffer electrode for highly-efficient membrane-free and decoupled hydrogen/oxygen evolution

Abstract

The realization of the membrane-free two-step water electrolysis is particularly important yet challenging for the low-cost and large-scale supply of hydrogen energy. In this effort, Co-doped Ni(OH)2 nanosheets were successfully anchored onto the nickel foam (NF) substrate through the in-situ growth of metal-organic frame material and the subsequent alkali-etching technique. Using the well-regulated Co-doping Ni(OH)2@NF electrodes as a charge mediator, electrochemical hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were decoupled on time scales, thus affording a membrane-free two-step route for H2 and O2 productions. In this architecture, the first HER process on the cathode could be maintained for 1300 s at a current of 100 mA, while the corresponding Ni(OH)2 charge mediator was simultaneously oxidized to NiOOH, with a decent cell voltage of 1.542 V. The subsequent OER process involved a reduction/regeneration of Ni(OH)2 (from NiOOH to Ni(OH)2) and an anodic O2-production, with an operating voltage of 0.291 V. Moreover, the Ni-Zn battery assembled through the combination of NiOOH and Zn sheet could replace the second step of OER to achieve the coupling of continuous H2-production and battery discharge, thus also providing a new way for hydrogen production without an external power supply. Experiment and theoretical calculations have shown that the cobalt-doping not only improved the conductivity of the charge-buffer electrode, but also shifted its redox potential cathodically and boosted the adsorption affinity of the buffer medium to OH– ions, both contributing to promoted HER and OER activity. Therefore, this decoupled water electrolysis device affords a promising pathway to support the efficient conversion of renewables to hydrogen.