锤片式粉碎机V型锤片设计及试验优化

Abstract

Low productivity and high electricity consumption are considered problems of the hammer mill, which is widely used in current feed production. In this paper, a folded V-shaped hammer was designed to improve the performance of the hammer mill. To determine the optimal design parameters of the new hammer, the single-factor test and orthogonal tests were carried out with the inclination angle of hammer, the angle of hammer head, and the distance of hammer head as the influencing factors, and the productivity and output per kWh as evaluation indexes. The order of the influence on the productivity and output per kWh were the inclination angle of hammer>the angle of hammer head> the distance of hammer head. The parameters were optimized based on the orthogonal tests with the following results: the angle of hammer head was 160°, inclination angle of hammer was 110°, and the inclination distance of hammer head was 24 mm. The static analysis and modal analysis were carried out on the optimized hammer by using ANSYS software. The results showed that the new hammer satisfies the strength and stiffness requirements during working, does not resonate, and has good dynamic characteristics. The new hammer can effectively improve the performance of the hammer mill, and the research results can provide theoretical basis for the optimization design of the hammer mill.