UWB radar technique for arc detection in coaxial cables and waveguides

Abstract

As spread spectrum technology has revolutionized the communications industry, Ultra Wide Band (UWB) technology is dramatically improving radar performances. These advanced signal processing techniques have been adapted to coaxial cables and waveguides to provide new features and enhanced performance on arc detection. UWB signals constituted by a sequence of chips (properly chosen to reduce side lobes and to improve detection accuracy) are transmitted along the transmission lines at a specified Pulse Repetition Frequency (PRF) and their echoes are received by means of directional couplers. The core of the receiver is an ultra high‐speed correlator implemented in a Digital Signal Processor (DSP). When a target (arc) is detected, its position and its “radar cross section” are calculated to be able to provide the arc position along the transmission line and to be able to classify the type of detected arc. The “background scattering” is routinely extracted from the received signal at any pulse. This permits to be resilient to the background structure of transmission lines (bends, junctions, windows, etc.). Thanks to the localization feature, segmentation is also possible for creating sensed and non‐sensed zones (for example, to be insensitive to antenna load variations).