Abstract
In this paper, a miniaturized size UWB 4-element MIMO antenna with a band rejection feature is introduced. The four elements have a rectangular radiator with curved edges and a partial ground plane with an etched slot to enlarge the bandwidth of the suggested structure to operate from 3 up to 12 GHz with S11 ≤ − 10 dB. The high isolation between elements was achieved by forming the antennas orthogonally without adding decoupling elements to simplify the design. The suggested design has a size of 47 × 47 mm2 placed on low price FR4 substrate. A simple slot is etched into the radiator to achieve the desired band rejection. The simulated and tested outcomes achieved operated band extended from 3 up to 12 GHz with band rejection feature within 3.3 GHz up to 4.3 GHz to eliminate interference with WIMAX applications and high isolation of more than 22 dB between ports. Also, the antenna fulfills peak gain of 3.5 dBi, envelope correlation coefficient(ECC) < 0.005, diversity gain (DG) 9.98 dB and channel capacity loss (CCL) < 0.4 bit/s/Hz within the operating bands. The outcomes have good consistency which made the suggested antenna to be used in UWB MIMO systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.